FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
Full complement cylindrical roller bearings are located here in the vessel crane. A rope sheave, is a pulley with a grooved wheel that holds a rope. Spinning inside the frame of the sheave, the grooved wheel allows the rope to move freely minimizing wear and abrasion.
Full complement cylindrical roller bearings are designed for heavier loads than same dimensioned counterparts using a cage. This added load carrying capacity is because of the increased number of rollers and is a trade- off for the lower speed rating. These ISO metric dimensioned bearings are supplied with C3 Internal Radial Clearance unless specified. They are industry interchangeable with like size numbered bearings and are used in such applications as accumulator sheaves, gearboxes and walking beam furnace eccentrics.

- 300 mm x 460 mm x 218 mm NSK RS-5060 FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- 4.3750 in
- Lubrication Fitting

- 560 mm x 820 mm x 195 mm NSK NCF30/560V FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- 19 mm
- Without Snap Ring

- 160 mm x 240 mm x 60 mm NSK NCF3032V FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- 3.9375 in
- Split Pillow Block


- 400 mm x 540 mm x 82 mm NSK NCF2980V FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- Not for Ball Screws
- 115 mm

- 260 mm x 360 mm x 60 mm NSK NCF2952V FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- 260 mm x 360 mm x 60 mm

- 180 mm x 250 mm x 69 mm NSK RS-4936E4 FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- Click here
- 8.0000 in

- 150 mm x 210 mm x 60 mm NSK RSF-4930E4 FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- 2.0000 in
- Contact Seal

- 220 mm x 340 mm x 160 mm NSK RS-5044 FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- 220 mm x 340 mm x 160 mm