FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
Full complement cylindrical roller bearings are located here in the vessel crane. A rope sheave, is a pulley with a grooved wheel that holds a rope. Spinning inside the frame of the sheave, the grooved wheel allows the rope to move freely minimizing wear and abrasion.
Full complement cylindrical roller bearings are designed for heavier loads than same dimensioned counterparts using a cage. This added load carrying capacity is because of the increased number of rollers and is a trade- off for the lower speed rating. These ISO metric dimensioned bearings are supplied with C3 Internal Radial Clearance unless specified. They are industry interchangeable with like size numbered bearings and are used in such applications as accumulator sheaves, gearboxes and walking beam furnace eccentrics.
- 150 mm x 190 mm x 40 mm NSK RS-4830E4 FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- 958 lb
- With Lubrication Fit
- 120 mm x 150 mm x 30 mm NSK RSF-4824E4 FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- Oil Groove and Holes
- 2600 rpm
- 150 mm x 190 mm x 40 mm NSK RS-4830E4 FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- Right Hand
- 0.5000 in
- 120 mm x 165 mm x 45 mm NSK RS-4924E4 FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- 7018a5trdulp3-nsk
- 140mm
- 120 mm x 180 mm x 80 mm NSK RS-5024 FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- 22213
- UL, AFBMA, AGMA, ASM
- 190 mm x 290 mm x 75 mm NSK NCF3038V FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- 35500 lbf
- 0.0600 in
- 420 mm x 560 mm x 82 mm NSK NCF2984V FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- 3.0000 in
- 7.8800 to 9.6200 in