FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
Full complement cylindrical roller bearings are located here in the vessel crane. A rope sheave, is a pulley with a grooved wheel that holds a rope. Spinning inside the frame of the sheave, the grooved wheel allows the rope to move freely minimizing wear and abrasion.
Full complement cylindrical roller bearings are designed for heavier loads than same dimensioned counterparts using a cage. This added load carrying capacity is because of the increased number of rollers and is a trade- off for the lower speed rating. These ISO metric dimensioned bearings are supplied with C3 Internal Radial Clearance unless specified. They are industry interchangeable with like size numbered bearings and are used in such applications as accumulator sheaves, gearboxes and walking beam furnace eccentrics.
- 140 mm x 190 mm x 50 mm NSK RS-4928E4 FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- Adapter Sleeve
- Four-Bolt Flange
- 360 mm x 540 mm x 243 mm NSK RS-5072 FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- Standard Duty
- Lubrication Fitting
- 380 mm x 560 mm x 135 mm NSK NCF3076V FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- UL, AFBMA, AGMA, ASM
- 23000 lb
- 110 mm x 140 mm x 30 mm NSK RSF-4822E4 FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- Lubrication Fitting
- Set Screw
- 150 mm x 190 mm x 40 mm NSK RS-4830E4 FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- Two-Bolt Base
- 1.4375 in
- 400 mm x 500 mm x 46 mm NSK NCF1880V FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- 400 mm x 500 mm x 46 mm
- 260 mm x 360 mm x 100 mm NSK NNCF4952V FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- 1/2 in
- Maximum of +225
- 110 mm x 140 mm x 30 mm NSK RSF-4822E4 FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- Set Screw
- Lubrication Hole