DOUBLE-ROW BEARINGS
Double row bearings are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity.
While single row bearings accommodate thrust in only one direction, these two row bearings are designed in a way that allows them to accommodate thrust in two directions. They are supplied in two designs in order to maintain a non-separable unit. Design 1 has a single double-row inner race, while design 2 has a single double-row outer race. Due to their construction, they are supplied with a very small positive axial clearance. Since this typical bearing has a special bearing number, no suffixes defining the cage type, contact angle or axial clearance are shown in the bearing number. ISO standard metric sizes are available in 190mm to 280mm bore range.
- NSK EE790120-N1/790223D+L DOUBLE-ROW BEARINGS
- UC205-14
- 2.64
- NSK * DOUBLE-ROW BEARINGS
- 4 Bolt Square Flange
- USI5000-215-C
- NSK EE171000D/171400+K DOUBLE-ROW BEARINGS
- 3.891 Inch | 98.83 M
- 0 Inch | 0 Millimete
- NSK 320KBE30+L DOUBLE-ROW BEARINGS
- Bearings
- 0.0
- NSK 220KBE042+L DOUBLE-ROW BEARINGS
- 4
- 19/32 Inch
- NSK 93800/93128D+L DOUBLE-ROW BEARINGS
- 4
- Non-expansion
- NSK 150KBE2401+L DOUBLE-ROW BEARINGS
- 0.028
- 0.0
- NSK HR110KBE42X+L DOUBLE-ROW BEARINGS
- 9 Inch | 229 Millime
- Cast Iron
- NSK EE551050/551701D+L DOUBLE-ROW BEARINGS
- Inch
- 3.54 Inch | 89.916 M
- NSK NA782/774D DOUBLE-ROW BEARINGS
- QM INDUSTRIES
- Metric
- NSK 220KBE031+L DOUBLE-ROW BEARINGS
- 2 Inch | 50.8 Millim
- Flange Block Bearing