DOUBLE-ROW BEARINGS
Double row bearings are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity.
While single row bearings accommodate thrust in only one direction, these two row bearings are designed in a way that allows them to accommodate thrust in two directions. They are supplied in two designs in order to maintain a non-separable unit. Design 1 has a single double-row inner race, while design 2 has a single double-row outer race. Due to their construction, they are supplied with a very small positive axial clearance. Since this typical bearing has a special bearing number, no suffixes defining the cage type, contact angle or axial clearance are shown in the bearing number. ISO standard metric sizes are available in 190mm to 280mm bore range.
- NSK HH224340/HH224310D+L DOUBLE-ROW BEARINGS
- ASAHI BEARINGS
- 0.0
- NSK 740KBE1101A+L DOUBLE-ROW BEARINGS
- 2 Piece | General Pu
- N/A
- NSK EE134103D/134143+K DOUBLE-ROW BEARINGS
- B04144
- N/A
- NSK 170KBE31+L DOUBLE-ROW BEARINGS
- Bearings
- N/A
- NSK 560KH31+K DOUBLE-ROW BEARINGS
- 0726166147358
- Roller Bearings
- NSK 230KDE4301A+L DOUBLE-ROW BEARINGS
- 0644075061421
- CONSOLIDATED BEARING
- NSK 1370KBE1601+L DOUBLE-ROW BEARINGS
- 0013992169211
- Bearings
- NSK 710KH31+K DOUBLE-ROW BEARINGS
- INTERNAL RUBBER LIP
- Non-Expansion
- NSK 630KBE30A+L DOUBLE-ROW BEARINGS
- N/A
- 18.597