FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
Full complement cylindrical roller bearings are located here in the vessel crane. A rope sheave, is a pulley with a grooved wheel that holds a rope. Spinning inside the frame of the sheave, the grooved wheel allows the rope to move freely minimizing wear and abrasion.
Full complement cylindrical roller bearings are designed for heavier loads than same dimensioned counterparts using a cage. This added load carrying capacity is because of the increased number of rollers and is a trade- off for the lower speed rating. These ISO metric dimensioned bearings are supplied with C3 Internal Radial Clearance unless specified. They are industry interchangeable with like size numbered bearings and are used in such applications as accumulator sheaves, gearboxes and walking beam furnace eccentrics.
- 320 mm x 400 mm x 80 mm NSK NNCF4864V FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- Guardian® Flange
- Ambient
- 180 mm x 280 mm x 74 mm NSK NCF3036V FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- Click here
- Right Hand
- 130 mm x 200 mm x 95 mm NSK RS-5026 FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- 1.5000 in
- 4547359514704
- 320 mm x 480 mm x 121 mm NSK NCF3064V FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- 54100 lbs
- Non-Expansion Bearin
- 500 mm x 670 mm x 100 mm NSK NCF29/500V FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- 52mm
- 23026cc/c3w33-qbl
- 300 mm x 380 mm x 38 mm NSK NCF1860V FULL-COMPLEMENT CYLINDRICAL ROLLER BEARINGS
- 180 mm
- 637410082908