FOUR-ROW CYLINDRICAL ROLLER BEARINGS
Four-row cylindrical bearings are engineered primarily for use in rolling mill roll-neck applications. These include back-up, intermediate and work roll positions in flat product, long product and structural mills.
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.
Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
- NSK 290RV3901 FOUR-ROW CYLINDRICAL ROLLER BEARINGS
- 52100 Chrome steel,
- 139,7
- NSK 200RV3231 FOUR-ROW CYLINDRICAL ROLLER BEARINGS
- 150x225x35
- 218 mm
- NSK 610RV8711 FOUR-ROW CYLINDRICAL ROLLER BEARINGS
- 1420 mm
- Timken
- NSK 440RV6221 FOUR-ROW CYLINDRICAL ROLLER BEARINGS
- 0,053 Kg
- 55 mm
- NSK 420RV5602 FOUR-ROW CYLINDRICAL ROLLER BEARINGS
- NJ 2307 ECP
- Separable Ring
- NSK 100RV1401 FOUR-ROW CYLINDRICAL ROLLER BEARINGS
- 65,1 mm
- 55.5625x110x65.1