FOUR-ROW CYLINDRICAL ROLLER BEARINGS
Four-row cylindrical bearings are engineered primarily for use in rolling mill roll-neck applications. These include back-up, intermediate and work roll positions in flat product, long product and structural mills.
Four-row cylindrical roller bearings are used almost exclusively for the roll necks of rolling mill stands, calenders and roller presses. Because they are normally mounted with an interference fit on the roll neck, four-row cylindrical roller bearings are well suited for rolling mill applications where the rolling speed is high.
Because four-row cylindrical roller bearings can accommodate only radial loads, they are mounted together with deep groove or angular contact ball bearings, or with tapered roller bearings (either radial or thrust design) which accommodate the axial loads.
- NSK 160RV2303 FOUR-ROW CYLINDRICAL ROLLER BEARINGS
- 26 mm
- 14000 r/min
- NSK 120RV1801 FOUR-ROW CYLINDRICAL ROLLER BEARINGS
- 50
- 50x110x44.4
- NSK 690RV9812 FOUR-ROW CYLINDRICAL ROLLER BEARINGS
- UCST204H1S6
- 12,7 mm
- NSK 290RV4101 FOUR-ROW CYLINDRICAL ROLLER BEARINGS
- 34,925
- 31,75 mm
- NSK 190RV2801 FOUR-ROW CYLINDRICAL ROLLER BEARINGS
- 120,000 mm
- 120,000
- NSK 820RV1117 FOUR-ROW CYLINDRICAL ROLLER BEARINGS
- 3,5 mm
- 190,5 mm
- NSK 145RV2101 FOUR-ROW CYLINDRICAL ROLLER BEARINGS
- 56,5 mm
- 40,4 kN
- NSK 160RV2401 FOUR-ROW CYLINDRICAL ROLLER BEARINGS
- 25,4 mm
- 0,09 Kg
- NSK 420RV5602 FOUR-ROW CYLINDRICAL ROLLER BEARINGS
- 870 r/min
- 240x500x155