DOUBLE-ROW BEARINGS
Double row bearings are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity.
While single row bearings accommodate thrust in only one direction, these two row bearings are designed in a way that allows them to accommodate thrust in two directions. They are supplied in two designs in order to maintain a non-separable unit. Design 1 has a single double-row inner race, while design 2 has a single double-row outer race. Due to their construction, they are supplied with a very small positive axial clearance. Since this typical bearing has a special bearing number, no suffixes defining the cage type, contact angle or axial clearance are shown in the bearing number. ISO standard metric sizes are available in 190mm to 280mm bore range.
- NSK 150KBE2702+L DOUBLE-ROW BEARINGS
- TIMKEN
- N/A
- NSK 200KBE030+L DOUBLE-ROW BEARINGS
- 8482.50.00.00
- N/A
- NSK 94706D/94118+K DOUBLE-ROW BEARINGS
- 100
- M06288
- NSK EE649237/649313D+L DOUBLE-ROW BEARINGS
- 0.0
- Not Rated
- NSK LM654648D/LM654610+K DOUBLE-ROW BEARINGS
- B04311
- 72.933
- NSK 100KBE1401+L DOUBLE-ROW BEARINGS
- 0651041190535
- 2-3/4" Roller D
- NSK EE971354/972102D+L DOUBLE-ROW BEARINGS
- M06288
- 0883450420600
- NSK 360KBE6001+L DOUBLE-ROW BEARINGS
- 6.3 Inch | 160 Milli
- Set Screw
- NSK 125KDE2301+L DOUBLE-ROW BEARINGS
- 0.0
- B04144
- NSK 440KBE31A+L DOUBLE-ROW BEARINGS
- 0.0
- BEARINGS LIMITED
- NSK 56418/56650D+L DOUBLE-ROW BEARINGS
- Cone
- TIMKEN